eilsoe
10-02 02:27 PM
sorry :P
sometimes i get carried away... :)
sometimes i get carried away... :)
wallpaper Armor Ring
werc
03-28 03:22 PM
So a person on H1B goes onto a H4 and wants to come back onto a H1B 3 months down the line. As per your statement , the person is subjected to the cap. Was that what you were implying ?
I think you were referring to this in the link.
b) Persons who have previously been counted against the H1B quota (a person would only be counted once against the cap unless s/he has a year outside the U.S., thereby resetting the clock on the six-year limit.)
I understand this to mean that aperson who has spent a year outside the US has 2 options.
1. To apply for a new H1 (subject to the cap)
2. To use the remainder of the 6 years he has from his prior H1B.
Please correct me if I am wrong.
If you don't have 1 year gap. otherwise you are subjected to.
I think you were referring to this in the link.
b) Persons who have previously been counted against the H1B quota (a person would only be counted once against the cap unless s/he has a year outside the U.S., thereby resetting the clock on the six-year limit.)
I understand this to mean that aperson who has spent a year outside the US has 2 options.
1. To apply for a new H1 (subject to the cap)
2. To use the remainder of the 6 years he has from his prior H1B.
Please correct me if I am wrong.
If you don't have 1 year gap. otherwise you are subjected to.
uumapathi
08-19 08:59 AM
My wife just got her EAD yesteday and it was for 2 years. I am expecting mine today and I hope it will be for 2 years as well and interestingly, my I140 is still pending.
2011 armor ring, black, cross,
gc_chahiye
08-01 08:09 PM
depends on what the job required per your labor cert. If it said 2 years, then even if you have 36 years of industry experience you need experience letters for only 2 years.
If you are going for EB2 and your LC says MS+1 year of experience, you need experience for 1 year. If your LC said BS+5 years you need 5 years worth. If your LC said the job requires expertise in VC++, your experience letter must mention VC++.
If you are going for EB2 and your LC says MS+1 year of experience, you need experience for 1 year. If your LC said BS+5 years you need 5 years worth. If your LC said the job requires expertise in VC++, your experience letter must mention VC++.
more...
godbless
12-14 04:12 PM
Thanks all.
1) While filing AP online it asks if I want to add more filings. I want to add my wife's I-131 as well. Also my wife is a derivative beneficiary of my pending 485. So, my question is should my wife and my AP supporting documents be mailed in the same packet, even though I will
create 2 separate files in the same packet. Please advise. Else, how will they know that my wife's AP renewal is linked to mine.
2) There is a section which asks for the data of Intended departure. In paper based filing i would type unknown at present time. But in e-file, i cant type that in the date field. Can I leave this field and the length of stay blank ?
3) Part 7 Info for me asks only if my trip is for single entry or multiple entry. It does not ask for any supplemental Info. What is this supplemental info people talk about ?
__________________________________________________ _
1. Make 2 sets of documents and send them separately. They would know because you would send a copy of I 485 petition of your wife as well in her packet.
2. You can put some future date in there.
3. It will be multiple entry. You have to write some thing describing the need for this AP.
I hope it helps.
1) While filing AP online it asks if I want to add more filings. I want to add my wife's I-131 as well. Also my wife is a derivative beneficiary of my pending 485. So, my question is should my wife and my AP supporting documents be mailed in the same packet, even though I will
create 2 separate files in the same packet. Please advise. Else, how will they know that my wife's AP renewal is linked to mine.
2) There is a section which asks for the data of Intended departure. In paper based filing i would type unknown at present time. But in e-file, i cant type that in the date field. Can I leave this field and the length of stay blank ?
3) Part 7 Info for me asks only if my trip is for single entry or multiple entry. It does not ask for any supplemental Info. What is this supplemental info people talk about ?
__________________________________________________ _
1. Make 2 sets of documents and send them separately. They would know because you would send a copy of I 485 petition of your wife as well in her packet.
2. You can put some future date in there.
3. It will be multiple entry. You have to write some thing describing the need for this AP.
I hope it helps.
ashutrip
06-18 09:38 AM
Yeah, Atlanta is hatching eggs with our PERM applications.
whats ur PD mine is march 10 2007
whats ur PD mine is march 10 2007
more...
bunan
01-07 02:47 PM
The best course is file I-140 for EB3... after you get it... file for EB2 I-140 and use PD from EB3... It's possible and worth every effort.
Absolutely possible and I have done it too. Please talk to your lawyer directly as he can advise you better.
Absolutely possible and I have done it too. Please talk to your lawyer directly as he can advise you better.
2010 Buy Knuckle Ring, armor ring,
FinalGC
08-04 09:25 AM
Great idea
more...
GCchakravyuh
07-13 08:58 AM
i guess you can just file for renewal of H4. few days before expiry.. say on Sep 1st.
hair Gothic Punk Nana Armor Ring
gauravsh
03-28 03:49 PM
Thanks !!
more...
Toxic'
May 20th, 2005, 08:49 PM
How'dee...
I'd like to thankyou each for your reply upfront & foremost...
I don't have any of the "fuzzball" pic's handy where as I've been deleting them as they come... I'll take some later tonight and post them...
"Until then..."-- jliechty
First idea: put the lens to manual focus, and try that on a tripod. Perhaps the focus point got moved, and the camera is attempting to focus on black sky? This test would attempt to eliminate that.
As I stated originally, the first half'dozen + photo's I took of the moon where over the course of 2 nights... and each of them were taken "handheld", with "full'auto" On. All the other settings were out of the box defaults. And every one of them were "in focus" as they appeared in the viewfinder. 2 weeks later when I attempted somemore moon'shots was when I realized that something was different. "Every" shot from then on of the moon was as I've been discribing. I've attempted more than 2 dozen shots via "Manual focus while on a Tripod, using the Timer". And the results are identical to the current "hand'held" photo's. As for the focus point... I've set the camera to lock in via "single area" bracket selection as discribed on page 67 of the manual. I've even gone as far as to focus in on the moon in "auto" mode and then switched over to "manual" mode, set the timer, and still the same thing...
Bobby Digital--
Manual focus and exposure bracketing are what you need to do.
I've just read into these again and was wondering if these are settings that could have been changed without me knowing? Or perhaps realizing? I'm presently at work and the moon is just coming into view... I'm going to head home in a bit and pickup my camera and try checking & or changing these settings to see if it helps...
Puncher--
As an alternative , spotmeter the moon to figure out the exposure and/or use the histogram.
I'll attempt this aswell...
I'll post my results after I've attempted these suggestions... "& Thanks again for your time...
Toxic'...
I'd like to thankyou each for your reply upfront & foremost...
I don't have any of the "fuzzball" pic's handy where as I've been deleting them as they come... I'll take some later tonight and post them...
"Until then..."-- jliechty
First idea: put the lens to manual focus, and try that on a tripod. Perhaps the focus point got moved, and the camera is attempting to focus on black sky? This test would attempt to eliminate that.
As I stated originally, the first half'dozen + photo's I took of the moon where over the course of 2 nights... and each of them were taken "handheld", with "full'auto" On. All the other settings were out of the box defaults. And every one of them were "in focus" as they appeared in the viewfinder. 2 weeks later when I attempted somemore moon'shots was when I realized that something was different. "Every" shot from then on of the moon was as I've been discribing. I've attempted more than 2 dozen shots via "Manual focus while on a Tripod, using the Timer". And the results are identical to the current "hand'held" photo's. As for the focus point... I've set the camera to lock in via "single area" bracket selection as discribed on page 67 of the manual. I've even gone as far as to focus in on the moon in "auto" mode and then switched over to "manual" mode, set the timer, and still the same thing...
Bobby Digital--
Manual focus and exposure bracketing are what you need to do.
I've just read into these again and was wondering if these are settings that could have been changed without me knowing? Or perhaps realizing? I'm presently at work and the moon is just coming into view... I'm going to head home in a bit and pickup my camera and try checking & or changing these settings to see if it helps...
Puncher--
As an alternative , spotmeter the moon to figure out the exposure and/or use the histogram.
I'll attempt this aswell...
I'll post my results after I've attempted these suggestions... "& Thanks again for your time...
Toxic'...
hot Gothic Skull Armor Ring(China
natrajs
05-17 10:03 PM
Guys, I received THE magic email also this week. Card Production ordered on May 14th. HUGE Relief!!!
I just wanted to pass on a few tips. These steps may or not have expedited my processing but the timing sure was suspiciously fortuitous:
a) On May 7th, since the NSC I-485 processing date was more than 30 days past my RD, my lawyer sent an official email to NSC asking them for an update on my application. According to my lawyer, CIS is obligated to reply within 45 days and in most cases instead of them saying that this specific application falls outside their processing dates, they just approve the application. Of course, your case has to be approvable (PD has to be current etc)
b) On May 9th, I set up an Infopass appointment where the IO told me that my case was in transit from a different service center back to NSC! She also told me both our NCs were complete.
c) My lawyer was also getting ready to file another round of EAD/AP applications which, according to her, draws CIS's attention to the fact that this application is ready for processing and falling outside the average time range.
Maybe the combination of inquiry email and Infopass helped moved the case or maybe it did not. Probably does not hurt to try at least once and, of course, you don't want to overdo it and burden the system.
Just my $0.02. Hope it helps. Best of luck with your applications. I learned a ton from these forums and (if nothing else) out of sheer habit, will be coming back all the time. Will try my best to help out IV where I can. Cheers!
Congrats and Best Wishes
I just wanted to pass on a few tips. These steps may or not have expedited my processing but the timing sure was suspiciously fortuitous:
a) On May 7th, since the NSC I-485 processing date was more than 30 days past my RD, my lawyer sent an official email to NSC asking them for an update on my application. According to my lawyer, CIS is obligated to reply within 45 days and in most cases instead of them saying that this specific application falls outside their processing dates, they just approve the application. Of course, your case has to be approvable (PD has to be current etc)
b) On May 9th, I set up an Infopass appointment where the IO told me that my case was in transit from a different service center back to NSC! She also told me both our NCs were complete.
c) My lawyer was also getting ready to file another round of EAD/AP applications which, according to her, draws CIS's attention to the fact that this application is ready for processing and falling outside the average time range.
Maybe the combination of inquiry email and Infopass helped moved the case or maybe it did not. Probably does not hurt to try at least once and, of course, you don't want to overdo it and burden the system.
Just my $0.02. Hope it helps. Best of luck with your applications. I learned a ton from these forums and (if nothing else) out of sheer habit, will be coming back all the time. Will try my best to help out IV where I can. Cheers!
Congrats and Best Wishes
more...
house Gothic finger armor ring
Gravitation
06-15 12:05 PM
How 'bout: Not filing because LCA is rotting in the basement of a BEC?
tattoo diamond, gold ring. $25.00
shreekhand
08-05 10:29 AM
True. I had the same question at a one point but got a verbal reply from CBP that since the I-94 has the same number with a new expiry date (the one given on the I-797), you are safe in the records.
Frankly, I never understodd why they can't put the valid until on the I-797's I-94. If you are asked to show your proof of legal stay, you would also need to carry your I-797 everytime now !
Thanks for the reply.
The printed I-797 bottom left is for employee's records and the right part is the equivalent of the I-94. The officer did not put a seal with the expiry date (normally they put a seal on I-94 mentioning the visa type and expiry date) on the right part. If I am surrendering this part while leaving the country,how can they determine if I overstayed my I-94 date or not since there is no expiry date on the bottom right part.
Frankly, I never understodd why they can't put the valid until on the I-797's I-94. If you are asked to show your proof of legal stay, you would also need to carry your I-797 everytime now !
Thanks for the reply.
The printed I-797 bottom left is for employee's records and the right part is the equivalent of the I-94. The officer did not put a seal with the expiry date (normally they put a seal on I-94 mentioning the visa type and expiry date) on the right part. If I am surrendering this part while leaving the country,how can they determine if I overstayed my I-94 date or not since there is no expiry date on the bottom right part.
more...
pictures armor rings for women. silver
katrina
07-21 04:58 AM
As long as you never out of status from the last time you reenter US (Aug 97) you should be OK and should submit your I485
dresses asos armor ring.
mgakhar
02-28 11:24 AM
Ok so herez the update. I went to the INS office and gave them all the details. and since I was supposed to travel out of the country in 3rd and 4th week of March, I requested the lady that if possible can you ask them to give me a date either before March 14th or after March 30th. She made a note of this and said that I should be expecting the FP notice soon.
So I get the FP Notice yesterday with an appointment date of 20th March. Great ... now I cant even go for the appointment. I guess will have to reschedule it.
I've read that its ok to reschedule the appointment just once but not more than once. Any advice on this would be really helpful.
thanks again Leoindiano for your advice !!
So I get the FP Notice yesterday with an appointment date of 20th March. Great ... now I cant even go for the appointment. I guess will have to reschedule it.
I've read that its ok to reschedule the appointment just once but not more than once. Any advice on this would be really helpful.
thanks again Leoindiano for your advice !!
more...
makeup Armor Ring. From Leviticus
sw33t
01-18 12:40 AM
From San Antonio. Count me in.
girlfriend Lombardy Armor Ring Gothic
dsneyog
01-14 10:44 AM
Thanks. there is hope. I paper files too and included self paid return envelope. Was yours renewal or fresh? Mine is fresh.Paper filed AP in TSC on Oct 28th 2009 & received the document on Dec 24th 2009 by mail.
Hope that helps.
Hope that helps.
hairstyles COSPLAY ARMOR RING
rajenk
02-11 03:57 PM
I-485 RFE details.
Needed evidences:
1. 2 Passport size photos in USCIS specs.
2. Form I-693 completed by civil surgeon.
We did submit all these requested I-693 and photos during the initial filing. My question is, does USCIS request for new I-693 if the original one submitted is older than one year or more?
Needed evidences:
1. 2 Passport size photos in USCIS specs.
2. Form I-693 completed by civil surgeon.
We did submit all these requested I-693 and photos during the initial filing. My question is, does USCIS request for new I-693 if the original one submitted is older than one year or more?
sundarpn
07-17 07:32 PM
In the same boat...
if the principal files 485 now and then gets married say 2-3 months later when the dates are NOT current, can a dependent 485 be filed for the spouse so that she can get EAD?
I was told that even in the case of a dependent 485 filing, the dates have to be current for the application to be accepted :(
On related lines, if the principal application gets EAD and after 6 months moves to a new job based on EAD, and then he gets married, can he bring his spouse on H4? I think the answer is NO.
if the principal files 485 now and then gets married say 2-3 months later when the dates are NOT current, can a dependent 485 be filed for the spouse so that she can get EAD?
I was told that even in the case of a dependent 485 filing, the dates have to be current for the application to be accepted :(
On related lines, if the principal application gets EAD and after 6 months moves to a new job based on EAD, and then he gets married, can he bring his spouse on H4? I think the answer is NO.
mambarg
07-26 12:57 PM
This person mailed on June 28 and app received on June 29 and got his notice date on July 24. Today.
I could have been with him today but for my attorney who got extremely busy and did not file my 485 with 140 and got stuck with July fiasco
I could have been with him today but for my attorney who got extremely busy and did not file my 485 with 140 and got stuck with July fiasco
No comments:
Post a Comment